There are no foot cut outs on this one
The center section is all steel tube fully welded seams, 1/4" thick steel. It acts as a receiver to accept the legs and arms of the cross.
This unit uses our standard compression fit. This means no bolts or nuts to line up in finicky holes. Just drop the corresponding leg or arm into the right socket and tighten the enclosed Allen bolt. It locks the wood into the reviver of the "X" and will not let it move until you loosen the Allen bolt.
This unit is free standing and self supporting. We do recommend that you sand bag the rear foot down with one bag of sand to keep it from moving or tipping for rough play.
This unit sets up in less than 5 minutes with just 5 Allen bolts. It comes with an attachment point at each end of the cross.
This unit comes standard with:
Clear coat paint for the “X”
Clear coat paint for the back support leg
Pine stained red oak color, then coated with polyurethane.
All wood edges have been ¼ rounded on a router and sanded smooth
We can custom size this to any height you need, we also can use different woods and wood stains for an up charge. Contact us for a quote.
Standard cross specs:
Width Top 58” Bottom 46”
Weight 75 pounds
Color wood red oak steel clear coat
Longest piece 55”
Width from center to center at the base 41”
Width from center to center at the top 53”